Chemical resistance water proof lining coat series is polymer coatings made from Polyurea resin. Due to its excellent flexibility and strength, it is highly compliant with the occurrence of deterioration and behavior of cracks. The coat is strong against chemicals, sea water and high weather resistance. The coated surface protects your valuable chemical plant, production facilities, plant equipment and inner surface of the chemical Tank and factory water way or floor from corrosion. You can paint easily by painting brush and roller on metal or surface of concrete and curing time is fast.
* Fast drying,Outstanding anti-corrosion, anti-rust performance ;
* High hardness; Strong adhesion;
* Good mechanical properties
with a temperature of 25°C and a humidity of 70%. It is for customer reference only
1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately weighed, and stirit evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.
2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 ° C, please pre-heat the A glue to 30 ° C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal the lid,to avoid the product due to moisture absorption scrapped.
3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a whitemist.Therefore,when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to use the heating and curing.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
Application :
Widely used in steel structure and metalic buildings ,strong ability of anti-rust and anti-corrosion,almost 10 years durabilities
* Ships & Boats * Stadium Facilities
* Metalic Bridges * Office Buildings
* Large Factory Equipments * Oil Tanks
* Harbour Equipments * Power Stations
FAQ:
Q: What's your MOQ?
A: Our MOQ is 100 Kilograms.
Q: Are you manufacturer or trading company?
A: We are professional manufacturer and we have our own factory.
Q: Can we visit your factory?
A: Yes.
Q: How about your payment?
A: Normally 30% deposit in advance, 70% balance before shipment by T/T, other payment terms also can be negotiated.
Q: Can we place OEM order?
A: Yes, we support OEM order. Brand,Logo & Packing Size all can be customized
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized
Company Display:
